Airtight & Vapor Control Technologies

TP 600 Compriband

TP600 is an impregnated joint sealing tape for use in a wide variety of movement joints including window perimeter seals and other applications.

FM 330 Pro Foam Air Seal

One part, rapid, moisture-curing expanding polyurethane foam which is gun applied and has excellent elasticity, air tightness and acoustic properties. Excellent adhesion to brick, block, stone, plaster and cementitious materials as well as wood, metal and a variety of plastics. The low post-expansion facilitates greater control during application.

ME508 Duo Membrane EW/F

ME508 is a non-woven fleece laminate which is self-adhesive across the full width of the membrane for optimised adhesion. Provides airtightness whilst allowing vapour to diffuse to the exterior of the building.

ME501 Duo Window Membrane HD

ME501 is a high strength, tear resistant membrane made from polyethylene copolymer film with non-woven fabric. It can be applied before or after window installation to suit on-site details and programming. It is also available with gasket options for fixing to window profiles.

ME501 VV Duo Window Membrane

ME501 VV is a high strength, tear-resistant window membrane.

ME220 EPDM Membrane

ME220 EPDM membrane is used for weather sealing the connecting joint between a window or a fa├žade & an adjacent structure, or to provide an internal air-tight barrier in a similar detail.

ME220 VV EDPM Membrane

ME220 VV is an EPDM-based membrane used for sealing interfaces to provide airtight or weather tight seals.

TP450 Compriband Timber Max

TP450 is a soft and flexible open cell polyurethane foam, impregnated with an acrylic based, UV stabilised resin. It provides a weather tight seal against the most severe combinations of wind & rain.

LD925 Flexible i-Seal Coating

LD925 is a sprayable, water-based elastic liquid membrane which forms an air seal after drying, with a moisture-variable diffusion resistance. Specifically designed for building applications where a high level of air tightness is required (eg Passive House). Apply for air and vapour sealing of floor-to-wall, wall-to-ceiling and various other joint connections. Forms a seamless membrane with very good adhesion to many porous surfaces and most typical building materials such as steel, concrete, stone, wood and aluminium. Can be painted, plastered or bonded to after drying. Due to the moisture-variable diffusion resistance, the seal can be applied to both the inside and outside of the construction.

We can help you specify the right products for your unique project.

Contact Us

Icknield Way Industrial Estate, Unit 4, The Forum, Tring HP23 4JY

01442 899 956